Siemens 9700, Installation Instructions Manual, Page: 38 / 45

32:(50(7(5,167$//$7,21$1'%$6,&6(783
9700 Power Meter Basic Setup
To commission the 9700 Power Meter you must setup the Power Meter
module and the Communications module. These modules control how the
9700 Power Meter measures data from the power system it is connected to
and how it communicates with connected networks or workstations.
The MGT is typically used for basic setup. Basic setup can be performed
using a properly configured workstation, provided the workstation’s setup
matches the 9700 Power Meter’s default communications settings.
Using the MGT to Configure the 9700 Power Meter
The MGT interface is ideal for field installation, quick device adjustments,
and use by maintenance personnel while at the installed location of the
device. The MGT provides a Quick Setup feature for basic setup
operations.
To perform basic setup through the MGT, press the button labeled
SETUP
,
and then the button labeled
QUICK SETUP
. The following menu appears:
Press the
QUICK SETUP
button
to access the basic setup
options.
Press PT/CT to set the potential and
Current Transformer ratings.
Press Serial COM to set up RS-
232 or RS-485 communications.
Press Ethernet COM to access
Ethernet network settings.
Press Demand to set demand
intervals.
Use the keypad to enter letters
and numeric values when they
are requested.
Use the arrow buttons to move
up and down in menu lists.