7XV5461-0Bx00
English
C53000-B1174-C173-5
59
Port 1, Port 2
820 nm interface
– Fibre-optic connector type
ST plug
– Optical wave length
λ
= 820 nm
– Baud rate
300 bit/s to 1.5 Mbit/s (for reach max.
4 km, max. 8 km at Port 3 via multimode fibre
300 bit/s to 4.096 Mbit/s (for reach
max. 24 km, max. 60 km, max. 100 km, max.
170 km at Port 3 via singlemode fibre)
– Receiver sensitivity (peak)
max. optical power for High Level
max. -40 dBm
max. optical power for Low Level
max. -24 dBm
– Optical Power Budget
min. 4.2 dB for 50/125 µm, NA
1)
= 0.2
min. 8 dB for 62.5/125 µm, NA
1)
= 0.275
– Reach
for multimode fibre an optical signal
attenuation of 3 dB/km is anticipated.
– Laser class I acc. to EN 60825-1/-2
for use of FO 62.5/125 µm and 50/125 µm
fibre
1
)
Numerical aperture (NA = sin
Θ
(launch angle)
)
2)
This FO type can be used alternatively instead of the types described in the manual.
Port 3
Remote connection interface for connection of multimode fibre
– Fibre-optic connector type
Duplex LC-connector, SFF
(IEC 61754
-
20 standard)
– Operating mode
full duplex
– Baud rate
38 Mbit/s
– Receiver coupling
AC
– Laser class I acc. to EN 60825-1/-2
for use of FO 62.5/125 µm and 50/125 µm
fibre
Transmitting power (peak)
min.
type
max.
50/125 µm, NA
1)
= 0.2
-19.8 dBm
-15. dBm
-12.8 dBm
62.5/125 µm, NA
1)
= 0.275
-16.0 dBm
-12.0 dBm
-9.0 dBm
100/140 µm
2)
, NA
1)
= 0.3
-10.5 dBm
-6.5 dBm
-3.5 dBm
200 µm HCS, NA
1)
= 0.37
-6.2 dBm
-3.7 dBm
+1.8 dBm
