3
CONFIGURATION SCHEME (Parameter setting)
Press the OK (
) key for 3 seconds to enter/ exit the configuration settings.
Both the relays will turn OFF.
Configuration.
Parameter
Display
Description
Initial Time
Delay
To go to next page before 3 seconds is complete
Key :
Blinking for 3 seconds
*
Key : Increments the blinking digit after every key. press
and rolls over from 0 to 9
Key : Shift the blinking to next digit (right) for every key press
Trip Time
Delay
To go to next page before 3 seconds is complete
Key :
Blinking for 3 seconds
*
Key : Increments the blinking digit after every key. press
and rolls over from 0 to 9
Key : Shift the blinking to next digit (right) for every key press
Relay Reset
Mode
To go to next page before 3 seconds is complete
Key :
Blinking for 3 seconds
*
Key : Changes relay reset mode
Range:
Default:
Auto, Manual
Auto
To go to next page before 3 seconds is complete
Key :
Blinking for 3 seconds
*
To go to next page before 3 seconds is complete
Key :
*
Key : Changes mode of operating
Dual, Under, Over
Range:
Blinking for 3 seconds
*
To go to next page before 3 seconds is complete
Key :
*
Key : Changes factor of rate
RPM, RPS, RPH
RPM
Range:
Default:
Rate Mode
Blinking for 3 seconds
*
Operating
Mode
To go to next page before 3 seconds is complete
Key :
Key :
Increments the blinking digit after every key press
n = -3, -2, -1, 0, 1, 2
*
Factory
reset
To go to next page before 3 seconds is complete
Key :
Blinking for 3 seconds
Key : Increments value (0-5). No action from 0-4. Factory reset
when ENT is pressed at 5.
Exponent
Blinking for 3 seconds
*
Scale Factor
Mantissa
