19
SICAM P850/P855 7KG85xx, Product Information
E50417-B1050-C482-A3, Edition 03.2013
UL-certification conditions
Field Wires of Control Circuits shall be separated from
other circuits with respect to the end use requirements!
10.3
Electrical Connection
Before commissioning the device, check that all
DANGER
Danger due to high voltages
Non-observance will lead to death or serious injury.
Work may only be carried out by trained personnel
(see Preface) who are familiar with and observe the
safety requirements and precautions.
Work may never be carried out if there is any danger-
ous voltage present.
De-energize the device.
Circuit breaker:
A suitable isolating device shall be
connected upstream in order to permit disconnection
of the device from the power supply. The circuit
breaker must be mounted close to the device, be eas-
ily accessible to the user and marked as a circuit
breaker for the device.
Secure the supply voltage with an approved (UL/IEC)
fuse: 1.6 A, type C.
If a melting fuse is used, a suitable approved (UL/
IEC) fuse holder has to be used.
NOTE
When performing electrical installations, you have to
observe the national and international regulations on
the erection of electrical power installations.