Siemens 73 82 851, Hardware Installation Manual

Page: 13 / 13

Installation instruction
Siemens Remote Service COIT-000.812.06.022.02 Seite 13/13 Siemens AG
Rev. 02 02-02 CO SGK Medical Solutions
GHVFULSWLRQ 5RXWHUSURPSW FRPPDQG
6WHS
Enter into the enable modus of the
router jac0356323qc828>
HQDEOH
6WHS
Enter the password to get into the
enable modus (this entry is not
visible) password:
SUHVHF
6WHS
Enter into the configuration modus
of the router
jac0356323qc828#
FRQILJXUHWHUPLQDO
The following output will appear Enter configuration
commands, one per line.
End with CNTL/Z.
6WHS
set the ip for modem1
jac0356323qc828(config)#
LSKRVWPRGHP
6WHS
Enter ctrl-z jac0356323qc828(config)#
A]
The following output will appear 3d22h: %SYS-5-CONFIG_I:
Configured from console
by console
6WHS
log onto the modem
jac0356323qc828#
PRGHP
The following output will appear
Trying modem1
(10.6.254.2, 2001)...
Open
User Access Verification
6WHS
Enter the username username
SUHUGLDJ
6WHS
Enter the password (not visible) password
SUHVHW
The following output will appear Password OK
6WHS
Echo on
DWH
The following output will appear OK
6WHS
Reset to factory settings.
1RWH
: 0 is „zero“
DW I Z
The following output will appear
OK
6WHS
Press ctrl-shift-6
A>VKLIW@
6WHS [
6WHS
Disconnect from the modem
jac0356323qc828#
GLVFRQQHFW
6WHS
Confirm that the connection to
modem1 shall be closed
Closing connection to
modem1 [confirm]
FU!
6WHS H[LW
Now your modem and your router are ready to be remotely configured by SIEMENS Remote Services.
$SSHQGL[*,6'1XVHRIWKHDQDORJURXWHU
1RWH
Should it become necessary to switch from the analog connection to an ISDN connection, the
configuration can be done via the analog interface of the router.