English
Operating Instructions (Compact) ANT792-8DR
19
A5E00647392-02
Installation
Installing the Antenna
Install the antenna on a wall or outdoors on a mast. Installation is outlined
in the following figures.
Notice
The preassembled cable connector for the 6GK5792-8DR01-0AA6 must
not be subjected to bending stress or be bent otherwise the cable entry in
the antenna housing may be damaged.
Tensile stress must always be avoided with all variants.
Wall Mounting
Base plate
Support bar
1. Secure the base plate to a
stable location on the wall
with four screws.
2. Screw the support bar
loosely to the base plate.
3. Position the support bar at
a suitable angle to the
base plate.
4. Tighten the support bar
and base plate.
