Product overview
2.4 Reset communication module to factory settings
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Manual, 03/2019, A5E45488510-AA
13
2.4
Reset communication module to factory settings
Effects of resetting to the factory settings
Use the "Reset to factory settings" function to restore the parameter assignments of your
IO-Link Master CM 8xIO-Link communication module made with S7-PCT to the factory state.
After a "Reset to factory settings", the parameters of the IO-Link Master CM 8xIO-Link
communication module are assigned as follows:
●
The ports are in DI mode
●
The ports are mapped to the relative addresses 0.0 ... 0.7
●
The PortQualifier is disabled
●
I&M data 1 to 3 is deleted
Note
The master backup of the IO-Link Master is deleted and the delivery condition is restored.
You should reset a removed IO-Link Master CM 8xIO-Link communication module to the
factory settings before you place it in storage.
Procedure
To perform a "Reset to factory settings", proceed as described in the S7-PCT online help.
Summary of Contents for 6ES7547-1JF00-0AB0
Page 1: ......
