Ε
nglish A5E02913274-01
Ε
nglish
Assembly
Check that the electronic submodule is not damaged.
Only connect undamaged electronic submodules to the
terminal module.
The first time that an electronic submodule is inserted, the
coding elements on the terminal submodule will snap in
(self-coded and type-coded) which prevents the insertion
of the incorrect submodule. This mechanical coding may
not be changed.
In Zone 1 and Zone 2, the electronic submodules may be
inserted and removed during operation. The enclosure
(Ex e / IP 54) in which the ET 200iSP is found may only be
opened briefly for this purpose (see the
ET 200iSP
manual).
In configuring the ET 200iSP, you must consider the
permissible number of electronic submodules (see the
ET 200iSP manual, chapter 3.6). Information on the
required functional power consumption for this is provided
in
ET 200iSP - Fail-Safe Modules
.
Commissioning
The relevant national regulations must be observed when
commissioning the system.
When checking the functionality of the equipment, observe
the EN 60 079-17 guidelines. This standard includes the
regulations found in the international standard
IEC 60 079-17.
Summary of Contents for 6ES7138-7FN00-0AB0
Page 116: ...Română A5E02913274 01 Română ...
