Siemens 6EP4131-0GB00-0AY0, Equipment Manual

Page: 59 / 264

SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
59
Engineering and remote access
3
3.1 General
This section describes the software tools offered by Siemens that are compatible with
SITOP UPS1600. The software tools are introduced with their functions, the associated
requirements and the operation. The software products are:
•
SIMATIC STEP 7 in the TIA Portal
• SIMATIC STEP 7
• SIMATIC PCS 7
• SITOP Manager
• Web server
• OPC UA
Functions of the individual software products
• SIMATIC STEP 7 in the TIA Portal
To use the SITOP UPS1600 in SIMATIC STEP 7 in the TIA Portal, it must have first been
saved to the hardware catalog. This can be realized by installing the relevant Hardware
Support Package (HSP) or the GSDML file.
• SIMATIC STEP 7
SITOP UPS1600 can be used with SIMATIC STEP 7 from Version 5.5 and higher. After
SITOP UPS1600 has been saved to the hardware catalog of STEP 7, it can be integrated
into projects, parameterized and diagnosed.
• SIMATIC PCS 7
SITOP UPS1600 can be used with SIMATIC PCS 7 from Version 8.2 SP1. After SITOP
UPS1600 has been saved in the hardware catalog and APL has been installed, it can be
integrated in the project, parameterized and diagnostics performed.
• SITOP Manager
The SITOP Manager is the new tool for commissioning, engineering and monitoring at
SITOP power supplies that are communication-capable. It is independent of engineering
frameworks such as the SIMATIC TIA Portal or the SIMATIC PCS 7. The SITOP Manager
replaces the UPS Manager tool.
• Web server
The web server is used to monitor the SITOP UPS1600. It operates independently of SITOP
Manager and PROFINET access.
• OPC UA
The OPC UA server is used for monitoring and controlling the SITOP UPS1600. It operates
independently of PROFINET and web server access.