Siemens 6DL1131-6TH00-0PH1, Equipment Manual

Page: 20 / 50

Parameters Value range Default Changing parame‐
ter settings in RUN
Efficiency range
Diagnostics: flutter error
(Page 23) • Enabled
• Disabled Disabled Yes Channel
Flutter monitoring: Mon‐
itoring window
(Page 23)
• 0.5 s
• 1 s to 100 s (can be set in 1 s-
increments)
0.5 s Yes Channel
Flutter monitoring: Num‐
ber of signal changes
(Page 23) • Disabled
• 2 to 32 Disabled Yes Channel
Hardware interrupts
(Page 23)
• Disabled
• Rising edge
• Falling edge
• Falling and rising edge
Disabled Yes Channel
Encoder type (Page 23) • Channel disabled
• NAMUR encoder
• Point of contact, unconnec‐
ted
• Point of contact, connected
with 10 kΩ
• NAMUR change-over con‐
tact
• Change-over contact, un‐
connected
• Change-over contact, con‐
nected with 10 kΩ
NAMUR encoder Yes Channel
Pulse stretching
(Page 24) • None
• 0.5 s
• 1 s
• 2 s None Yes Channel
Digital input (Page 26)
1) • Normal
• Inverted
Inverted Yes Channel
Potential group
(Page 26) • Potential group of the left
module (dark gray terminal
block)
• New potential group (light
gray terminal block)
• No potential group (black
terminal block)
Use potential
group of the left
module No Module
1)
If you re-parameterize the "Digital input" parameter, an edge change is generated.
Parameters
6.2 Module/channel parameters
DI 16xNAMUR HA
20
Equipment Manual, 08/2019, A5E39293880-AD