Installing and connecting the device
3.2 Inserting the mounting seal
IFP2200 INOX MT ETH
20
Compact Operating Instructions, 07/2021, A5E42185570-AD
Note
Ensure that the maximum ambient temperature is not exceeded when mounting the device
in a cabinet and especially in a closed enclosure.
3.2
Inserting the mounting seal
To prevent the mounting seal from being inserted in the wrong direction, it has an
asymmetric coding tap. The coding tap is located at the bottom left of all mounting seals of
the INOX devices, relative to the rear of the device.
Note
Use a new mounting seal for each installation, because the promised degree of protection
cannot be guaranteed otherwise.
Procedure
1.
Look for the coding tap on the mounting seal. Turn the mounting seal so that the coding tap
is on the bottom left as seen in the figure below:
①
Coding tap
②
Positioning hooks
③
Seal corner
