manualshive.com logo in svg

Siemens 6 Series, Installation And Operating Instructions Manual

Share
Download
Siemens 6 Series Installation And Operating Instructions Manual Download Page 28

en

    Programme settings

28

--------

â

 

(Favourite 

programme)

Press 

â

 (Favourite programme) to save the settings and acti-

vate a programme with customised programme settings.

Saving or overwriting a favourite programme:

1.

Set the programme you require.

The programme settings will appear on the display.

2.

Adjust the programme settings if required.

3.

Press and hold 

â

 (Favourite programme) for 3 seconds.

This programme with your customised programme settings has
now been saved to your list of favourites.

Note:  

The selected settings will be retained even after the ap-

pliance has been switched off.

Activating a favourite programme:

1.

Press 

#

 to switch on the appliance.

2.

Press 

â

(Favourite programme).

This favourite programme with your customised programme set-
tings has now been activated.

Summary of Contents for 6 Series





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands