Siemens 5WG1 372-5EY01, Manual, Page: 48 / 60

48
weekly program
„Standard“
weekly program
„Priority 1“
weekly program
„Priority 2“
weekly program
„Priority 3“
weekly program
„Priority 4“
weekly program
„Priority 5“
weekly program
„Priority 6“
weekly program
„Priority 7“
weekly program
„Priority 8“
weekly program
„Priority 9“
Priority times
P1-P9
Date
switching
times
Permanently
ON/OFF
ON
OFF
RELAY
The time period of a weekly program P1 .. P9 is fixed by entering a commence-
ment and finishing date. The weekly program begins at 0. 00 on the commence-
ment date and ends at 24
00
on the finishing date.
Example: As opposed to the normally active program on Channel C2 from
8 April until 27 May , the individual priority program with index P1 is to beco-
me effective. In the fixed time period with priority sequence P1 .. P9, the whole
standard program (without priority sequence) is suppressed.
8.2 Setting Time Period for Weekly Program P1 .. P9
Additional programming as described or with button
v
back into the auto-
matic program.
Select P
Channel 2
Date Start
Confirm
Date End
Prio select
Store
A. Recurring annually
Confirm