Siemens 30 80 991 Replacements Of Parts Download Page 4

Page: 4 / 22

General Information

Display

TD00-000.841.02.04.02

Siemens AG

05.05

CSPS21

Page 4 of 22

Medical Solutions

1General Information

General Remarks

Safety Information

DHHS Regulations (Department of Health and Human Services) skipped (no high volt-
age).

Assuming a complete replacement, no contact points for line power, etc. are present.

NOTE

ARTD-002.732.17.. (Safety-technical Regulations for Installation
and Repair) must be observed.

WARNING

Certain components inside the units are under high voltage!

If there is contact with these components, it can cause damage,
serious bodily injury or death.

Do not open the monitor housing; this is not necessary
in a service situation.

WARNING

A damaged power cable can lead to fire or electric shock!

If these components are operated with a damaged power cable, it
can cause damage, serious bodily injury or death.

Use only power cables that are in good condition! When
disconnecting the power line, hold the power cable only
by the connector.

WARNING

If objects are inserted into the housing, this can cause electrical
shock.

This can cause damage to the unit, to other damage, serious bodi-
ly injury or death.

Do not insert objects into the housing!

WARNING

When handling connection cables, no contact with the patient may
be made.

This can cause damage, serious bodily injury or death of the pa-
tient.

Do not connect the unit in the patient area!

Monitor Remarks

•

The SCD 1897-M is a high-resolution 18" display (46 cm).

•

Prerequisite for the adjustment is the Instruction Manual that is shipped with each dis-
play.

Summary of Contents for 30 80 991























Search results

Summary of Contents for 30 80 991

Reviews:

Related manuals for 30 80 991

Brands by name

Popular brands

Siemens 30 80 991, Replacements Of Parts

Search results

Summary of Contents for 30 80 991

Reviews:

Related manuals for 30 80 991

Brands by name

Popular brands