background image

CE1N2206en
2018-11-07

Building Technologies

s

2

206

       REV24RF..

RCR10/868

Radio set with 7-day
room temperature
controller

REV24RF../SET

Comprising a room temperature controller (with integrated radio transmitter)
and receiver with relay outputs

·

Mains-independent, battery-operated room temperature controller featuring
user-friendly operation, easy-to-read display and large numbers.

·

Self-learning two-position controller with PID response (patented).

·

  Operating mode selection:

 

- 7-day automatic mode with max. 3 heating or cooling phases.

  - Continuous comfort mode.
  - Continuous energy saving mode.
  - Protection against frost or overheating.
 

- Exception day (24 hour operation) with max. 3 heating or cooling phases.

·

  A separate temperature setpoint can be entered in automatic mode and for

the exception day for each heating or cooling phase.

·

  Heating zone control.

·

Possibility to control cooling equipment.

·

Advantage for retrofitting, renovating, and reconstruction purposes
(completely wireless room unit).

Use

Room temperature control in:

·

  Single-family and vacation homes.

·

  Apartments and offices.

·

  Individual rooms and professional office facilities.

·

  Commercially used spaces.

Control for the following equipment:

·

  Magnetic valves of an instantaneous water heater.

Summary of Contents for 24RFDC/SET



















Reviews: