manualshive.com logo in svg

Siemens 1FT6031-4AK71-4AH0-Z, Manual

Share
Download
Siemens 1FT6031-4AK71-4AH0-Z Manual Download Page 7

Designation of the documentation 

 
 
Printing history 
 
Brief details of this edition and previous editions are listed  below. 
 
The status of each edition is shown by the code in the ”Remarks” column. 
 
Status code in the ”Remarks” column: 
 
A 

New documentation 

B 

Unrevised reprint with new Order No. 

C 

Revised edition with new status 

 
If factual changes have been made on the page since the last edition, this is indicated by a new edition coding in the header on 
that page. 
 
Edition   

Order No. for 1FT6   

 

 

Remarks 

12.04 

 

6SN1197-0AD12-0BP0 

 

 

       A 

 

 
 
 
 
 
 
 

 
 
 
Trademarks 

SINAMICS

®

, SIMOTION

®

, SIMATIC

®

, SIMATIC HMI

®

, SIMATIC NET

®

, SIROTEC

®

, SINUMERIK

®

, SIMODRIVE

®

, SIMOVERT 

MASTERDRIVES

®

 and MOTION-CONNECT

®

 are registered trademarks of Siemens AG. Other names in this publication might 

be trademarks whose use by a third party for his own purposes may violate the rights of the registered holder.

 

 
 
 

Further information is available on the Internet under: 
http://www.siemens.com/motioncontrol 
 
This publication was produced with SIPS+ 
 

© 

Siemens AG 2004. All rights reserved. 

 

The control system may support functions that are not described in 
this documentation. However, no claim can be made regarding the 
availability of these functions when the equipment is first supplied or 
in the event of servicing.

 

 

We have checked that the contents of this document correspond to 
the hardware and software described. Nonetheless, differences might 
exist and therefore we cannot guarantee that they are completely identical. 
The information given in this publication is reviewed at regular intervals  
and any corrections that might be necessary are made in the subsequent 
printings. Suggestions for improvement are also welcome. 
 

We reserve the right to make technical changes. 

Order No. 6SN1197-0AD07-0BP2 
Printed in the Federal Republic of Germany

 

 

Siemens–Aktiengesellschaft

 

 

 

Summary of Contents for 1FT6031-4AK71-4AH0-Z













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands