Siemens Nixdorf RM300 C20, Operating Manual

Page: 86 / 205

76
RM300 C Models U24801-J-Z146-2-7600
6
Software
submenu Startup
Information on the parameters::
Proceed as follows:
Ê Fill in the form.
Ê Save the values by pressing the
[SAVE]
function key.
You then return to the
X Server Administration
window.
Ê Choose the menu item Extended .
Start via xdm If you choose yes here, xdm restarts the X server each time the
system is powered on and whenever a session is terminated.
Your work is then completely graphic.
If you enter no instead, the X Server will not start
until you invoke the startx & or startrx & command
from the shell. This means that you must first log on
to the Alpha screen.
!