Settings
10 - English
A26361-D1160-Z120-4-7419
Setting USB power jumper
The power supply of the USB port is set with the jumper.
Position 1 - 2
The USB port is only supplied with power when switched on.
Position 2 -3
The USB port is always supplied with power (default setting).
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service center).
On
The System BIOS executes from standard floppy drive A: and the inserted "Flash-
BIOS-Diskette" restores the System BIOS on the system board.
Off
Normal operation (default setting).
Write protection for floppy disks - switch 3
Switch 3 is used to define whether floppy disks can be written or deleted in the standard floppy disk
drive. To write and delete floppy disks, the write-protection in
BIOS Setup
must be disabled (in menu
Security
, the field
Diskette Write
must be set to
Enabled
).
On
The standard floppy disk drive is write-protected.
Off
Read, write and delete floppy disks is possible (default setting).
