Siemens Nixdorf D970 Technical Manual Download Page 6

Page: 6 / 120

Intel and Pentium are registered trademarks and OverDrive is a trademark of Intel Corporation, USA.

Microsoft, MS, MS-DOS, Windows and Windows NT are Trademarks of Microsoft Corporation.

PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.

All other trademarks referenced are trademarks or registered trademarks of their respective owners,
whose protected rights are acknowledged.

Siemens AG 1998.

All rights, including rights of translation, reproduction by printing, copying or similar methods, even
of parts are reserved.

Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model or design, are
reserved.

Delivery subject to availability. Right of technical modification reserved.

Summary of Contents for D970

























































































































Search results

Summary of Contents for D970

Reviews:

Related manuals for D970

Brands by name

Popular brands

Siemens Nixdorf D970, Technical Manual

Search results

Summary of Contents for D970

Reviews:

Related manuals for D970

Brands by name

Popular brands