Siemens Mobile TC45 Manual Download Page 361

Page: 361 / 461

TC45 AT Command Set

15.5 AT^SPBC

obile

TC45_ATC_V02.02

Page 361 of 461

4/16/04

Confidential / Released

The write command retrieves the first (lowest) index in the list of sorted phonebook entries beginning with char-
acter

<schar>

Parameter Description

The character to be searched in the sorted list of phonebook entries. Character coding and formatting according
to the settings made with

AT+CSCS

Search algorithms follow the sorting algorithms referenced in

Chapter 15.1, page 351

The first (lowest) index number within the phonebook memory selected with

AT+CPBS

for which the correspond-

ing <text> parameter starts with character

<schar>

If no matching phonebook entry is found, <index> =0 will be returned.
The index retrieved with AT^SPBC can be used only as an index for

AT^SPBG

. Do not use the listed index num-

bers to dial out or modify entries.

<schar>

(str)(+CSCS)

<index>

(num)

Summary of Contents for TC45














































































































































































































































































































































































































































































Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands

Siemens Mobile TC45, Manual

Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands