Siemens Mobile TC45 Manual Download Page 347

Page: 347 / 461

TC45 AT Command Set

14.3 AT^SSTGI

obile

TC45_ATC_V02.02

Page 347 of 461

4/16/04

Confidential / Released

14.3

AT^SSTGI SAT Get Information

Regularly this command is used upon receipt of an URC "

^SSTN

" to request the parameters of the Proactive

Command.
Then the TA is expected to acknowledge the

AT^SSTGI

response with

AT^SSTR

to confirm that the Proactive

Command has been executed.

AT^SSTR

will also provide any user information, e.g. a selected menu item.

The Proactive Command type value specifies to which "

^SSTN

" the command is related.

Syntax

Parameter Description

TC45 Remote-SAT interface states

RESET

OFF

IDLE

PAC

WAIT

Test Command

AT^SSTGI=?

Response(s)

^SSTGI:

(list of supported

<state>

s), (list of supported

Read Command

AT^SSTGI?

Response(s)

^SSTGI:

<state>

Write Command

AT^SSTGI=

Response(s)

ASC0

ASC1

MUX1

MUX2

MUX3

Reference(s)

SIEMENS

<state>

(num)

Summary of Contents for TC45














































































































































































































































































































































































































































































Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands

Siemens Mobile TC45, Manual

Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands