Siemens Mobile TC45 Manual Download Page 269

Page: 269 / 461

TC45 AT Command Set

11.5 AT+FCIG

obile

TC45_ATC_V02.02

Page 269 of 461

4/16/04

Confidential / Released

11.5

AT+FCIG Query or set the Local Polling ID

Syntax

Parameter Description

Local Polling ID string, max. length and possible content as reported by test command. Default value is empty
string ("").

Notes

• Used for Fax Class 2 only

• See also

AT+FLID

Query or set the Local Id setting capabilities.

Test Command

AT+FCIG=?

Response(s)

(max. length of Local Polling ID string) (range of supported ASCII character values)

Read Command

AT+FCIG?

Response(s)

<id>

Write Command

AT+FCIG=

<id>

Response(s)

ASC0

ASC1

MUX1

MUX2

MUX3

Reference(s)

EIA PN-2388

<id>

(num)

Summary of Contents for TC45














































































































































































































































































































































































































































































Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands

Siemens Mobile TC45, Manual

Search results

Summary of Contents for TC45

Reviews:

Brands by name

Popular brands