manualshive.com logo in svg

Siegenia KFV BS 230 Series, Assembly Instructions Manual

Share
Download
Siegenia KFV BS 230 Series Assembly Instructions Manual Download Page 16

03.2020

16/20

H39.MFVRS012EN-01

KFV – Assembly instructions

Multi-point locks, key operated, main lock set

Checking the counter-pressure 

retention

 

f

Move the deadbolt to the 

 

locking position.

 

f

Press back the deadbolt 

 

manually.

The deadbolt must not move back 

in case of counter-pressure.

 2 x

Retracting the main lock bolt

 

f

Turn the key in the unlocking 

direction with a double turn.

The main lock bolt must be able to 

retract completely and with ease.

5.5.3 

Check when the door is closed

Checking the engaging of the latch

 

f

Shut the door.

The door must close easily.
The latch must engage properly in 

the AT piece.
If the latch does not engage or if 

the pressure on the door seal is too 

high:

 

f

Adjust the AT piece in the direc

-

tion of the door leaf.

If the latch has too much play:

 

f

Adjust the AT piece in the direc

-

tion of the frame.

Summary of Contents for KFV BS 230 Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands