30
DRIVE axxent DK
Assembly and operating instructions
03.2021
12. EC declaration of incorporation
Producer
SIEGENIA-AUBI KG
Hardware and ventilation technology
Duisburger Straße 8
57234 Wilnsdorf
declares that the product:
concealed tilt sash locking drive
device type:
DRIVE axxent DK
type designation
meets the following fundamental requirements:
EC Machinery Directive
2006/42/EC
EMC Directive
2014/30/EU
EN 301 489-1
EN 301 489-17
Low voltage directive
2014/35/EU
EN 60335-1:2012
EN 60335-2-103:2010
RoHS Directive
2011/65/EU
This declaration is based on test reports from:
EMC TestHaus Dr. Schreiber GmbH - Test protocol 14/383
The incomplete machine may only be commissioned if it has been ascertained that the machine into which it is to be installed
conforms to the specifications of the Machinery Directive.
The specific technical documentation has been compiled in accordance with Appendix VII Part B of the EC Machinery
Directive 2006/42/EC.
We undertake to provide such documentation to the regulatory authorities in electronic format within a reasonable time
upon a well-founded request. The aforementioned technical documentation can be obtained from the producer.
Siegen, 04/05/2018
This declaration certifies conformity with the directives cited but does not constitute a warrant of properties in a legal sense.
The safety instructions provided in the product documentation supplied require compliance.