Installation and operating instructions
AEROMAT 150
03.2020
5
Mains supply
The AEROMAT 150 is connected directly to the 230 V AC mains power supply using an external switch.
Exposed electrical components.
Risk of fatal injury from electric shock or fire.
›
Work on a 230 V AC mains power supply may only be performed by a qualified electrician.
›
All work on the 230 V AC mains power supply must be carried out in compliance with the current German VDE
regulations (e.g. VDE 0100) and any relevant country-specific requirements.
›
Switch off or unscrew the fuses.
Important:
If the AEROMAT 150 is connected directly to the 230 V AC mains power supply, a mains isolator must be
installed by the customer.
›
Wire the circuit according to this circuit diagram
Connection Type DK
Switch assignment
S1 Opening and closing of the locking plate
PE
1
2
3
5
4
6
S1
PE
N
L1
blue 1
brown 2
black 3
Unit function
Pressure differential operation
• The room is ventilated as the indoor and outdoor air pressures are equalised (pressure differential). As this happens, the
air normally flows from outside into the room.
• The air flow into the room varies as the wind pressure changes with the weather.
Operation
1
2
Type DD
: The rotary knob allows you to open and close the locking plate. You may continuously adjust the required airflow
between both end positions of the rotary knobs.
Type DK
(with 5-wire connecting cable): The locking plate may only be opened and closed by external switches, e.g. AF1,
or controlled via external units.
Locking plate
Rotary knob
Summary of Contents for AERO AEROMAT 150
Page 1: ...ИНСТРУКЦИЯ Siegenia Aeromat 150 ...
Page 6: ......
