10
Last update: 01.08.2013
Automated latch release
Assembly instructions
Liability
Intended use
Any use of this product that is not in accordance with its intended use, or any adaptation of or modification to the product
and its associated components for which our express consent has not been obtained, is strictly prohibited. We accept no
liability whatsoever for any material losses or injury to people caused by failure to comply with this stipulation.
Product liability
Our products are warranted – subject to correct installation and proper use – for a period of one year from the date of re-
ceipt by a company (according to our general terms and conditions) or as otherwise agreed, and for a period of two years
for end consumers, in accordance with statutory provisions. As part of our ongoing improvements, we reserve the right to
replace individual components or entire products. Consequential losses resulting from defects are excluded from the war-
ranty within the limits of the law. The warranty shall become void if modifications that are unauthorized by us or have not
been described in this documentation are performed on the product and/or individual components, or if the product and/or
individual components is/are dismantled or partly dismantled, and the defect is due to the changes made.
Exclusion of liability
The product and its components are subject to stringent quality controls. As a result, they function reliably and safely when
used correctly. Our liability for consequential losses and/or claims for damages is excluded, except in the case of wilful mis-
conduct or gross negligence, or where we are responsible for injury to life, limb or health. Strict liability under the German
Product Liability Act (Produkthaftungsgesetz) remains unaffected. Liability for the culpable violation of significant contractual
obligations also remains unaffected; liability in this case is limited to losses that are specific to the contract and that could
have been foreseen. The above regulations do not imply a change in the burden of proof to the detriment of the consumer.
Environmental protection
Although our products do not fall within the scope of the German Electrical and Electronic Equipment Act (ElektroG), KFV
will continue to meet the requirements of this Act and will endeavour to completely eliminate the use of substances that are
hazardous to the environment as soon as this becomes technically feasible. Electrical products should not be disposed of as
household waste.
Feedback on documentation
We welcome your comments and suggestions on how to improve our documentation. Please send us your feedback by e-
mail to [email protected].
We, KFV KG, declare under our own responsibility that this product complies with the provisions of
Directives 2008/108/EC and 2006/95/EC of the Council of the European Union.
EU Declaration of Conformity
Technical specifications
Relative humidity
20 % bis 80 %
Ambient temperature in door
-- 10 bis + 45 °C
Dimensions
Width 16 mm, length approx. 252 mm, depth 49 mm + width of face plate
Supply voltage
24 V DC max. 500 mA
Cable types
Type
LIYCY
Ambient temperature, non-fixed
-- 5 bis + 50 °C
Ambient temperature, fixed
-- 20 bis + 70 °C
