background image

7

Last update: 01.08.2013

Operating instructions

Automated latch release

ENGLISH

Programming in the infra-red master key

     ›     Retract all locking elements.

     ›     Open the door and hold it open.

     ›     Switch off the operating voltage.

     ›     Press and hold down the "open" button (terminal 2 (+24 V) with terminal 4 ("open")) 

     ›     Switch on the operating voltage.

     ›     The red LED in the infra-red eye will flash.

     ›     Hold the infra-red master key in front of the infra-red eye and press the button on it several times.

     ›     The red LED in the infra-red eye will light up

     ›     An acoustic signal is generated to indicate that programming was successful.

 All infra-red access keys must now be activated once more.

Programming in infra-red access keys

     ›     Switch off the operating voltage. Wait for all LEDs to extinguish.

     ›     Switch on the operating voltage.

     ›     Hold the infra-red master key in front of the infra-red eye and press the button on it several times.

     ›     The red LED will flash.

     ›     Hold the access key in front of the infra-red eye and press any button on it.

     ›     An affirmative sequence of beeps is generated to indicate that programming was successful.

     ›     To check that programming was successful, press the "open" button on the infra-red access key once more.

     ›     Switch on the operating voltage.

    

Deleting infra-red access keys

Important

: The delete process always deletes all infra-red access keys.

     ›     Retract all locking elements.

     ›     Open the door and hold it open.

     ›     Switch off the operating voltage.

     ›     Press and hold down the "open" button (terminal 2 (+24 V) with terminal 4 ("open"))

     ›     Switch on the operating voltage.

     ›     The red LED in the infra-red eye will flash.

     ›     Hold the infra-red master key in front of the infra-red eye and press the button on it several times.

     ›     The red LED in the infra-red eye will light up.

     ›     An acoustic signal is generated to indicate that programming was successful.

All infra-red access keys must now be programmed in again.

Setting up the fingerprint scanner 

To set up the fingerprint scanner, please follow the instructions in the "Quick Reference" for the type F automated latch 

release.

Summary of Contents for GEN AS Series















Reviews: