K.
FREEZING OF PUMPS
1.
Water frozen in pumps will void warranty.
Winterizing mix = 50/50 mix of water and auto/RV anti-freeze or straight
windshield washer fluid with a temperature rating well below the forecasted
ambient low temperature.
If freezing conditions are suspect, always intake approximately 1 gallon of
winterizing mix or until mix is expelled for gun discharge.
System Flush (Winterizing)
Disconnect the supply line from the tank and
place the end of the hose in a container with 50% water and 50% antifreeze,
or straight windshield washer fluid (see above).
Start the unit and run until antifreeze flows out of the discharge of the pump,
hose reel and gun.
Cover to protect from severe elements and/or rodents.
27
Pump mailing/shipping instructions:
Disconnect pump from motor. If problems are encountered, call for
instructions in the best method to separate the hallow shaft pump
from the motor.
Leave all valves, unloader and fittings connected to the pump.
Disconnect at hose reel.
Drain the pump oil.
Place in a sealed plastic bag and & box, package for sturdy
handling.
Send to:
Siebring Manufacturing, Inc.
303 S. Main St.
George, IA. 51237
888-475-3317
