Siebeck GmbH
0perating manual
rbm-bed-0910
Page 11
Correct positioning of the products to be tied up
1. For the first and each subsequent binding the products to be
tied up should be fed until over the guide edge marked on the
worktop (see illustration below).
2. After the first binding, the products get fed further to the right
and once again until nearly over the guide edge.
Should tying up the product twice not suffice, the process
needs to be repeated.
3. If the product gets pushed beyond the guide edge, the binding
will be loose. If the product gets fed just short of the guide
edge, the binding will fail / the string will snap.
Kordel
An
leg
ek
an
te
An
leg
ek
an
te
Kordel
An
leg
ek
an
te
An
leg
ek
an
te
Nadelarm
Nadelarm
Tischplatte
Tischplatte