4. Unscrew the fastening screws at the fan plate.
5. Pull the fan at the metal flap to the front to remove it out of the device
[C]
.
6. Insert the new fan in reverse order.
7. Repeat the procedure for the second fan.
Replacing the capacitor unit
1. Remove the fastening screws
[A]
of the cover (Torx 10).
2. Then, remove the other fastening screws
[B]
of the cover (Torx 20) and remove the
cover carefully from the device to the front.
3. Unplug the connector from the female connector
[D]
.
4. Unscrew the fastening screws.
5. Lift the capacitor unit carefully and pull it to the front to remove it out of the device
[E]
.
6. Insert the new capacitor unit in reverse order.
7. Repeat the procedure for the second capacitor unit.
5.8.2.2
Device 0362281BF
Replacing the DC link extension
1. Loosen the bolts (
A
) of the front panel cover and remove it from the DC link exten-
sion 036225000.
2. Remove the fastening bolts [
B
] of the DC link extension.
35
Drive System SD2M - Hardware Description 036228xxF
Drive Amplifier SD2M
