SIEB & MEYER 0480123B, Manual

Page: 19 / 28

Fig. 1: Connection principle of the USB↔SM-NET adapter 0480123B
3.4 Function
Modern applications require modern operating systems with appropriate RAM capaci‐
ties on machine controls. Previously delivered industrial PCs can not meet these
requirements anymore. Another problem is that only small amounts of PC mainboards
are still available for exchange of defect mainboards.
With the USB↔SM-NET adapter 0480123B SIEB & MEYER offers the possibility to
connect the SIEB & MEYER CNC 48.00 to a standard PC. This requires that the PC is
equipped with a USB interface.
The USB↔SM-NET adapter is connected to the CNC via the SM-NET connection.
The status of the connection to the PC is displayed via LEDs on the USB↔SM-NET
adapter.
The USB↔SM-NET adapter 0480123B is conceived for the following CNC:
▶ CNC 48.00
3.5 Installing and Connecting the USB↔SM-NET
Adapter
If you have obtained an assembly kit, start with step 1, if you have obtained a
readily mounted module, start with step 2.
Step 1: Assembling the USB↔SM-NET adapter card 048010023B and the front panel
➮ Insert the USB↔SM-NET adapter card as shown in the figure into the supplied
front panel [1].
➮ Mount one of the supplied handles at the top of the front panel and fix it with a
screw [2].
➮ Fix the USB↔SM-NET adapter additionally with a second screw to the front panel
[3].
➮ Fix the second handle on the bottom of the front panel [4] with 2 screws, shim
washers and screw nuts.
➮ Insert the supplied labels (0480123B) into the handles [5].
W
The USB↔SM-NET Adapter
0480123B - USB↔SM-NET Adapter 19
3