14
5488
7
2021
-
RCT 20U, 21U, 22U, 23U & REMOTE RECEIVER
S-Link Receiver Installation
EN
• Install the receiver minimum 1 meter (3ft) from high power cables and data communication cables or other sources of electrical interference, i.e.
navigation instruments, radio communication devices, electric motors and generators.
• Install the receiver minimum 1 meter (3ft) above sea level.
• Install the receiver outside of shielded areas for radio signals, i.e. boxes made of metals or other material with shielding properties.
• Install the receiver in a dry environment, where no condensation can enter the unit. (The receiver assembly is not waterproof.).
• Mount the receiver using the four holes.
•
The receiver is powered by the S-link cable.
• Connect the supplied wiring harnesses to the receiver unit according to the wiring diagram. Connect thrusters and windlasses to the appropriate
connectors according to the diagram.
• For use with other windlass brands, connections must be determined by the installer according to the out put signals diagram.
MC_0183
!
Please refer to the graphic for special considerations relating to your model
!
MG_0193
Mount the receiver
by using the 4 holes
