Siddons Solarstream MAHRW015WAA, Owner'S Manual

Page: 13 / 17

10
Parameter16£The ambient
temp.setting for the unit
enter the ambient temp.
Too low protection
Alternative range:
-30¡ to 0¡Default: -15¡
(The minus sign can not
display) Parameter B£Water
outlet temperature Parameter A£Hot water
tank temperature
Range: -9¡ to 99¡
Actual testing value
Parameter C£
System coil temperature
Range: -9¡ to 99¡
Actual testing value
Parameter D£
System suction
temperature
Range: -9¡ to 99¡
Actual testing value Parameter E£
Not applicable on this
model
Parameter F£
Ambient temperature
Range: -9¡ to 99¡
Actual testing value Parameter G£
The electric expansion valve
opening Range:
15*10
¡
35*10
Actual testing value
Parameter17£The paramter
is set for recovering
refrigerant or adding
refrigerant
0:The unit normal running
1:The unit enter recovering or
adding refrigerant mode
Default: 0
¢ Note: After recovering refrigerant or adding refrigerant,you must reset the paramter 17 to 0,or else the unit
can not heating.
¢
£
The hot water tank temperature setting
of auxiliary electric heater mode
The temp. of start high-temperature
disinfection per week setting
10 60
2 15
10 90
0 90 min
60 90
0 90 min
30 90 min
-30 0
2 30
1 12 min
1~20
-F(15) F(15)
15*10 35*10
60
12
55
30 min
70
30 min
45 min
-7
13
8 min
6
5
1
(35*10)
Defrost cycle setting
Enter defrost temperature setting
Exit defrost temperature setting
Exit defrost max. time cycle setting
High-temperature disinfection maintain time
Tank temperature difference value for the
compressor restart setting
Domestic hot water tank temperature setting
The unit's operation data can be set on the wire controller.
Please set according to the table below.
3. Operation Data Setting
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Parameter
Content description
range
default
Adjust
Adjustable
Adjusted by technicians
Not applicable
Not applicable
Not applicable
Not applicable
Adjusted by technicians
Adjusted by technicians
Adjusted by technicians
Adjusted by technicians
Not applicable
Adjusted by technicians
Adjusted by technicians
Adjusted by technicians
Electric heating start time delay the
time after the unit turn on
1
1
1
The electric expansion operation step setting
for the electric expansion manual control style
Difference temp. Value between solar
and tank for Solar pump start setting
The target superheat temperature setting
for the electric expansion valve.
The control style selection of the electronic
expansion valve
¢
0: manual control
1:automatic control
Alternative range: -9¡ to 99¡
Actual testing value
CLOCK TIMER ELEC CLOCK TIMER ELEC CLOCK TIMER ELEC CLOCK TIMER ELEC CLOCK TIMER ELEC
CLOCK TIMER ELEC CLOCK TIMER ELEC CLOCK TIMER ELEC CLOCK TIMER ELEC
Parameter15£
Water tank temp.
Supplement setting
CLOCK TIMER ELEC