Sicma S.p.A.
Miglianico (CH)
page 25
MAINTENANCE OF THE MACHINES
FIRST CHECK
-
Check the correct tension of the driving belt *
-
Check that all bolts and nuts are tightened strongly *
-
After the first 50 hours of work change oil in the overgear unit *
EVERY 8 HOURS OF WORK
-
Grease the shaft support (driveline side) through the lubricating nipple A (picture 20)
-
Grease the shaft support (external side) through the lubricating nipple A (picture 21)
-
Grease the shaft support (driveline) (
TA, TMX, TLX-R, TSD, TE, SL
) through the lubricating
nipple A (picture 22)
-
Grease the stabilizing roller through the lubricating nipple A (picture 23)
-
Grease the side shift rods through the lubricating nipple A (picture 24 -
TMX, TR, TRX, TE
-
and picture 25 -
TSP
- )
-
Grease the cardan shaft spiders on gearbox (
TR, FB, TSD
); do as follows (picture 26):
- screw out wing nuts A and remove safety guard B;
- grease the spiders through lubricating nipple (see the cardan shaft manual);
- after greasing replace safety guard B and tighten wing nuts A strongly.
EVERY 50 HOURS OF WORK
-
Check the correct tension of the collection rotor gearing chain (only TSD) and lubricate *
-
Check the correct tension of the driving belt *
-
Check that all bolts and nuts are tightened strongly *
-
Check the cutters/hammers wear state
-
Check the overgear unit oil level through plug A (picture 27)
EVERY 500 HOURS OF WORK
-
Check that all bolts and nuts are tightened strongly *
-
Change oil in the overgear unit *
EVERY 1000 HOURS OF WORK
Replace the driving belt*
* ATTENTION: this maintenance activity is to be made only at SICMA authorized repair shops.
Picture
20
Picture
21
Summary of Contents for FB 180
