![background image](http://html.mh-extra.com/html/sick/wi180c-pns01/wi180c-pns01_operating-instruction_1264189012.webp)
4.
Push the series-connected devices onto the 5-pin connection on the left side of
the device. Make sure that the sequence is correct (see the operating instructions
for the relevant device).
5.
Fix the connected devices on the mounting rail without any spaces.
5.5
Connecting the device
NOTE
Switch the power supply off before you connect or replace the devices.
1.
Connect the male M12 D-coded connector for the PROFINET network to the
PROFINET connection on the device and secure it using the sleeve nut.
2.
Connect the female M8 connector on the power supply to the underside of
the device and screw the male connector tight.
5
MOUNTING
12
O P E R A T I N G I N S T R U C T I O N | WI180C-PNS01
8022756/2018-08-08 | SICK
Subject to change without notice