10
8021262/V1-0/2017-04| SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC Extractive
Subject to change without notice
2
IMPORTANT SAFETY INSTRUCTIONS
2.7
Intended Use
The TRANSIC Extractive is a stationary system and serves continuous measurement of oxy-
gen in the industrial sector.
The sample gas is taken from a sampling point and feed through the gas analyzer
(extractive measurement).
Operation in explosion-hazard areas
Suitable for areas according to ATEX and IECEx (IEC 60079-10).
2.7.1
RoHS Directive
This product is designed for applications in large industrial plants according to
Article 2 (4) e, RoHS 2011/65/EU and can therefore only be used in such systems.
The product is neither suitable nor approved for use outside of theses systems.
SICK cannot assume any kind of warranty or liability for use outside of these systems.
2.7.2
Measured components
2.7.3
Measuring range
2.8
Requirements for the Qualification of Personnel
For further and detailed information about intended use of the TRNSIC151LP,
refer to the respective Operating Instructions.
Gases
O
2
(Oxygen)
Component
Range
Unit
O
2
0 ... 21
%
0 ... 100
%
ambient measurement 2 ... 21
%
Note
Qualified personnel
●
Qualified personnel have the specialist training, skills, and experience, as
well as knowledge of the relevant regulations and standards, to be able to
perform tasks delegated to them and to detect and to avoid any potential
dangers independently.
●
Electricians have the specialist training, skills, and experience, as well as
knowledge of the relevant standards and provisions to be able to carry out
work on electrical systems and to detect and avoid any potential dangers
independently.