COMMISSIONING
6
45
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
Loading the standard parameters
At the initial commissioning stage, the standard parameters included on the connected
device as the factory settings will be automatically downloaded and transferred over to
the configuration software.
The standard parameters can then be adapted to the requirements of the individual
application. The bottom left-hand corner of the programming interface is now activated
and entries can be made.
Fig. 30: Loading the standard parameters
A note will appear in the status bar when the configuration has been loaded successfully.
Note