SICK safeRS3, Operating Instructions Manual

Page: 103 / 120

9.2.3 Power supply terminal block
!
"
§
Note : connector front view.
Symbol Description
1 GND
2 Earth
3 + 24 V DC
Note : the maximum operating temperature of the cables must be at least 70 °C.
Note : use only copper wires with a minimum gauge of 18 AWG and a torque of 0.62 Nm
(5,5 lbs in).
9.2.4 CAN bus terminal block
Symbol Description
+ + 12 V DC output
H CAN H
L CAN L
- GND
Note : the maximum operating temperature of the cables must be at least 70 °C.
9.2.5 Connectors M12 CAN bus
2 1
4 3
5
Male connector
2 1
4 3
5
Female connector
Pin Function
1 Shield, to be connected to ground circuit power supply terminal block of
the control.
2 + 12 V DC
3 GND
4 CAN H
5 CAN L
9 TECHNICAL REFERENCES
8027489/2022-03-01 | SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | safeRS3
103