SICK AG hereby declares that the RFU610-106xx radio equipment complies with
the 2014/53/EU directive. The complete text of the EU declaration of conformity
is available at the following web address:
12 Device overview
RFU610-106xx: Device overview
Regional
assign‐
ment
Firmwa
re from
version
Carrier fre‐
quency
Transmitting
power of the
internal
antenna
Device
type
Part no.
Supplied
Quickstart
(Part no.)
Europe
V2.06
865.7 MHz ...
867.5 MHz
Max. 24 mW
(ERP
1)
)
RFU610-
10600
1091102 English
(8023832),
German
(8024099)
USA/
Canada
V2.06
902.75 MHz ...
927.25 MHz
Max. 42 mW
(EIRP
2)
)
RFU610-
10601
1099890 English
(8023832)
1)
ERP = equivalent radiated power.
2)
EIRP = equivalent isotropic radiated power.
12.1 Operational restrictions
NOTICE
Operational restrictions!
When delivered, the frequency band of the RFU610-106xx is configured in
such a way that it can be operated in the following assigned regions (depend‐
ing on the model) without interfering with protected frequencies (such as
mobile communications):
•
RFU610-10600 (Europe)
•
RFU610-10601 (USA/Canada)
Operating the same RFU610-106xx in other regions can interfere with pro‐
tected frequencies.
•
Only use the RFU610-106xx in the region for which it has been
approved.
•
When reselling the RFU610-106xx, inform the buyer of the regional
assignment.
France
The RFU610-106xx must not be operated within a 20 km radius of 13 military
zones.
Lithuania
There may be restrictions in Lithuania (extent not currently known).
USA
(1) This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
(2) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
(3) Note: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
(4) To comply with FCC part 15 rules in the United States, the system must be pro‐
fessionally installed to ensure compliance with the Part 15 certification.
(5) It is the responsibility of the operator and profes-sional installer to ensure that
only certified systems are deployed in the United States. The use of the system in
any other combination (such as co-located antennas transmitting the same infor‐
mation) is expressly forbidden.
(6) This device complies with the limit values defined by the FCC for radio radia‐
tion in an uncontrolled environment. The device must have a minimum distance
of 20 cm between the source of radiation and your body.
Canada
(1) This Class A digital apparatus complies with Canadian ICES-003.
(2) This device satisfies the Industry Canada CNR applicable to license-free radio
equipment. Use is permitted providing the two following conditions are met: (1)
The device must not cause any faults and (2) the user of the device must accept
any fault produced in the device, even if this may impair its function.
13 Sources for obtaining more information
Additional information about the device, its optional accessories, and fieldbus
modules can be found in electronic format on the following product pages on the
Internet at:
13.1 RFU610-106xx read/write device
•
Summary of type-specific technical data (online data sheet)
•
EU declaration of conformity
•
Dimensional drawing and 3D CAD dimension models in various electronic
formats
•
Suitable accessories (includingu. a. transponders, cables, brackets, trigger
sensors)
•
Quickstart RFU610-106xx read/write device (UHF) in English (no. 8023832)
and German (no. 8024099)as well as in other languages
•
Ordering information, e.g. in the RFID Product Information in English
(no. 8016267) and German (no. 8016266)
•
Publications dealing with accessories
13.2 Function blocks
•
Function blocks for communication between a SIMATIC controller (S7-300/
S7-400) and the device.
•
Function blocks for other controllers on request.
13.3 Documents on request
•
Overview of command strings of the device
Support is also available from your sales partner:
13.4 Copyright notices
Open source programs
SICK uses open-source software in the device. This software is licensed by the
rights holders using the following licenses among others: the free licenses GNU
General Public License (GPL Version2, GPL Version3) and GNU Lesser General
Public License (LGPL), the MIT license, zLib license, and the licenses derived from
the BSD license.
This program is provided for general use, but WITHOUT ANY WARRANTY OF ANY
KIND. This warranty disclaimer also extends to the implicit assurance of mar‐
ketability or suitability of the program for a particular purpose.
More details can be found in the GNU General Public License.
View the complete license texts here:
Printed copies of the license texts are also available on request.
8023832//2019-04-15/en
RFU610 | SICK
6
