Operating Instructions
PBS Hygienic
3 2
O p e r a t i n g I n s t r u c t i o n s | S I C K
8016359/2013-05-20 | PBS Hygienic
Subject to chance without notice
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate pressure switch has
been selected in terms of measuring range, design and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
Open the connections only after the system has been depressurized.
■
Observe the working conditions in accordance with Chapter 3 "Technical data".
■
Always operate the pressure switch within the overpressure safety range!
Further important safety instructions can be found in the individual chapters of these operating
instructions.
2.1 Intended use
The pressure switch is used to convert pressure into an electrical signal indoors and outdoors.
The instrument has been designed and built solely for the intended use described here, and may only be used
accordingly.
The technical specifications contained in these operating instructions must be observed. Improper handling
or operation of the instrument outside of its technical specifications requires the instrument to be taken out of
service immediately and inspected by an authorized SICK service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
2. Safety
