49
8018478/YWL5/2018-06| SICK
O P E R A T I N G I N S T R U C T I O N S | NAV245
Subject to change without notice
ALIGNMENT OF THE SCAN LEVEL
4
4.5.1
Alignment of the rolling angle
The first step: the optimization of the alignment will be done by adjusting of the rolling angle
(graphic on the right side).
Therefore the hexagon socket screws #1 and #2 have to be loosened, the scanner care-
fully turned and finally the screws have to be fixed hand-tight again.
Abb. 41: adjusting of the rolling angle NAV245
The alignment is optimal and done, if the bar in the center of the right graphic stays green.
Abb. 42: optimal adjustment of the roll angle
Hexagonal socket screws, left
and right for the adjustment and
fixation
