Chapter
10
MSC800
120
Operating instructions | SICK
8011540/14B8/2019-06-06
Subject to change without notice
Annex
Part no.
Description
View
1040571
MSC800-0000 (logic unit)
2039442
1 x DVD “Manuals & Software Identification &
Measuring” with software and documentation
2034693
1 x read cycle sensor WL18-3 (photoelectric
sensor) with connecting cable and mounting
set
2041013
MLG light grid (incl. connecting cable and male
connector)
Tab. 54 Ordering information: modular system controller MSC800 (continued)
For precise type designation of the MSC800, see the type label on the device.
10.3.2
Accessories: pre-wired cables for CAN SENSOR Network
Part no.
Description
1)
Wires
Length
Connection
6021166
CAN data cable,
Ø 6.8 mm, shielded, twisted pair,
with 5-pin M12 female connector and open end
(wire ferrules), IP 65, PVC-free
2 x 0.32 mm
2
2 x 0.25 mm
2
5 m
First ID sensor on
MSC800 (open end)
6021175
As no. 6021166, but longer
2 x 0.32 mm
2
2 x 0.25 mm
2
10 m
First ID sensor on
MSC800 (open end)
6021164
CAN data cable, shielded, twisted pair, with 5-pin
M12 female connector and 5-pin M12 male connector,
IP 65, PVC-free
1 m
ID sensor to
ID sensor
6021165
CAN data cable, shielded, twisted pair, with 5-pin
M12 female connector and 5-pin M12 male connector,
IP 65, PVC-free
3 m
ID sensor to
ID sensor
6021168
CAN data cable, shielded, twisted pair, with 5-pin
M12 female connector and 5-pin M12 male connector,
IP 65, PVC-free
5 m
ID sensor to
ID sensor
6021167
CAN termination resistor, shielded, 5-pin
M12 male connector, IP 65
–
–
Bus closure on the last
ID sensor
1) Other cables on request.
Tab. 55 Available accessories: pre-wired cables for CAN SENSOR Network
Important