1.
Ensure the voltage supply is not connected.
2.
Connect the device according to the connection diagram.
1
2
3
4
5
6
7
8
Figure 2: Pin assignment of the 8-pin connection
1
Trigger input, with optocoupler (+)
2
Supply voltage input (V ) 12-24 V DC
3
General Purpose I/O (GPIO) 1, 3.1 V
4
Ground (GND)
5
Flash output, with optocoupler (+)
6
Flash output, with optocoupler (-)
7
Trigger input, with optocoupler (-)
8
General Purpose I/O (GPIO) 2, 3.1 V
ELECTRICAL INSTALLATION
6
8025780/0000/2020-07 | SICK
O P E R A T I N G I N S T R U C T I O N S | midiCam2
15
Subject to change without notice
