SICK microScan3 Pro I/O, Operating Instructions Manual

Page: 78 / 228

Available data:
• Status of safety function
• Status sleep mode
• Contamination warning
• Contamination error
• Reference contour monitoring
• Manipulation
• Cut-off path (safety-oriented)
• Cut-off path (Not safety-related)
• Current monitoring case
• Application error
• Device error
Assembly 120: output of the device, input of the control (not safety-related)
•
CIP
•
Update cycle: 5 ms (or a multiple of this, depending on RPI)
•
Length: 12 bytes
•
For automation and diagnostic tasks without safety implication
Available data:
• Status of safety function
• Status sleep mode
• Contamination warning
• Contamination error
• Reference contour monitoring
• Manipulation
• Cut-off path (Not safety-related)
• Reset required
• Current monitoring case
• Application error
• Device error
Assembly 121: Output of the device, input of the controller (not safety-related)
• CIP
• Update cycle: 5 ms (or a multiple of this, depending on RPI)
• Length: 8 bytes
• For automation and diagnostic tasks without safety implication
Available data:
• Control input
• Speed at dynamic control input
4.5.4 Host-guest group
Overview
You can connect one microScan3 Pro I/O to up to 3 other microScan3 EFI-pro or
microScan3 Pro I/O via EFI-pro.
The microScan3 Pro I/O takes over the role of the host. The other microScan3 are
guest devices.
In a host-guest group, all devices can use the local inputs and outputs of the host.
Prerequisites
• The host is a microScan3 Pro I/O.
• Each guest is a microScan3 EFI-pro or a microScan3 Pro I/O.
• All devices are on the same network.
• All devices have the same SNN.
4
PROJECT PLANNING
78 O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O 8025424/1ELL/2022-01-21 | SICK
Subject to change without notice