7.13
Inputs and outputs, local
Overview
Figure 77: Inputs and outputs, local
1
Overview: Plug connectors of the safety laser scanner
2
Available signals
3
Pin assignment
4
Remove signal from connection
5
Further settings for some signals
Assign the required signals to the safety laser scanner connection in the
Inputs and
outputs, local
dialog box.
Connection overview
Safety Designer shows the plug connectors of the safety laser scanner.
Pin assignment
Safety Designer displays the plug connectors with their individual pins.
Assigning signals to the pins
Safety Designer shows the available signals on the right under
Signals
.
b
Click on the desired signal type (e.g., on
Inputs
).
✓
The menu shows the possible inputs.
b
Drag the signal towards the pins.
CONFIGURATION
7
8025424/1ELL/2022-01-21 | SICK
O P E R A T I N G I N S T R U C T I O N S | microScan3 Pro I/O
131
Subject to change without notice
