9
FAULT DIAGNOSIS
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
110
9
Fault diagnosis
This chapter describes how to identify and remedy errors and faults in the system.
9.1
Response to faults
WARNING
Danger due to malfunction!
Cease operation if the cause of the malfunction has not been clearly identified.
Measures
▸
Immediately stop system operation if you cannot clearly identify the fault and if you
cannot safely remedy the problem.
9.2
Fault indicators
9.2.1
Status indicator on the display
The Master Data Analyzer uses four types of status indicators to display the various
operational statuses. The system distinguishes between messages regarding the
system
status
,
measurement status
,
storage status
, and
connection status
.
The status messages are broken down into
Info
,
Warning
, and
Error
messages.
Warning
messages are
yellow
while
Error
messages are
red
.
Green
status messages document
proper operation and measurement by the system.
The messages shown on the display are designed so that you can quickly understand
what the error is and then use this information to rectify the cause of the problem.
In addition to the status messages, the system’s operational and measurement readiness
is also visualized by colored circles (see chapter
7.2.3 Structure of the measurement
Pressing on the corresponding symbol opens a window with a status message.
9.2.1.1
Dealing with status messages
Status messages that contain warnings or errors always have to be dealt with straight
away.
The following message will appear if an object has been measured which was not fully in
the measurement field. Because this is an error, the status message will be red.
Note
Example
