Chapter
5
Operating Instructions
TPS
28
Operating Instructions | SICK
8021799/2017-09-26
Subject to change without notice
Electrical installation
5
Electrical installation
HAZARD
Disconnect the power to the system
Make sure that all TPS components are disconnected from the voltage supply
during electrical installation.
HAZARD
Risk of injury due to electrical current
Standard safety requirements must be met when working on electrical systems.
The voltage supply must be disconnected when attaching and detaching electrical
connections.
5.1
Wiring plan
Establish the connections in accordance with the following wiring plan. Connect the
components according the wiring connection overview inside the control cabinet.
Fig. 25: TPS wiring plan