2
Safety information
2.1
Improper use
•
The device does not constitute a safety-relevant device according to the EC Machi‐
nery Directive (2006/42/EC).
•
The device must not be used in explosion-hazardous areas.
•
Any other use that is not described as intended use is prohibited.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
The device is not suitable for the following applications (this list is not exhaustive):
•
As a safety device to protect persons, their hands, or other body parts
•
Underwater
•
In explosion-hazardous areas
•
Outdoors, without additional protection
NOTICE
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
b
The device should be used only in line with intended use specifications.
b
All information in these operating instructions must be strictly complied with.
2.2
Intended use
The KTS contrast sensor is an opto-electronic sensor for the optical, non-contact detec‐
tion of contrasts.
A contrast sensor is designed for mounting and may only be operated according to its
intended function. For this reason, it is not equipped with direct safety devices.
The system designer must provide measures to ensure the safety of persons and
systems in accordance with the legal guidelines.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.3
Limitation of liability
Applicable standards and regulations, the latest state of technological development,
and our many years of knowledge and experience have all been taken into account
when assembling the data and information contained in these operating instructions.
The manufacturer accepts no liability for damage caused by:
■
Failure to observe the operating instructions
■
Improper use
■
Use by untrained personnel
■
Unauthorized conversions
■
Technical modifications
■
Use of unauthorized spare parts, wear and tear parts, and accessories
With special variants, where optional extras have been ordered, or owing to the latest
technical changes, the actual scope of delivery may vary from the features and illustra‐
tions shown here.
SAFETY INFORMATION
2
8020706.1E9P/2022-04-26 | SICK
O P E R A T I N G I N S T R U C T I O N S | KTS/KTX Prime
7
Subject to change without notice
