Chapter
7
Operating Instructions
ICR890 High-end CCD Camera System
90
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Maintenance
Cleaning the front window
Note
Electrostatic charges cause dust particles to stick to the front window.
This effect can be combated by using anti-static SICK synthetic cleaner (no. 5600006) in
combination with a SICK lens cloth (no. 4003353).
¾
Use a clean, soft brush to free the front window from dust.
¾
If necessary, additionally clean the front window with a clean, damp, lint-free cloth and
a mild, anti-static window cleaning fluid.
If the front window is scratched or damaged (cracked, broken), it must be replaced. Please
contact the SICK Service.
7.2.2
Cleaning the housing
In order to ensure sufficient cooling for the illumination, make sure that the air inlet and
outlet opening are always clean.
¾
Use a soft brush to free the openings at the ventilator on top of the housing and at the
cooling ribs of the air outlet openings on both narrow sides from dust.
Abb. 7-1:
Cleaning the front window
clean here
Abb. 7-2:
Cleaning the air inlet and outlet openings at the system's illumination ICR890
clean here
