Operating Instructions
Chapter
2
ICR890
Safety information
8011325/0000/2006-10-24
©
SICK AG · Division Auto Ident · Germany · All rights reserved
17
2
Safety information
This chapter deals with your safety and operator safety.
¾
Read this chapter carefully
before
using the ICR890 System.
2.1
Authorized users
For correct and safe functioning, the ICR890 System must be installed, operated and
maintained by sufficiently qualified staff.
Repairs to the ICR890 System should only be carried out by qualified and authorized SICK
AG service staff.
¾
The operating instructions should be made available to the end user.
¾
The end user should be briefed and urged to read the operating instructions by the
technicians.
The following chapters summarize the required qualifications for the various tasks.
2.1.1
Installation and maintenance
•
Practical technical training
•
Knowledge of current health and safety regulations at the workplace
2.1.2
Electrical installation and the replacement of system components
•
Practical electrical training
•
Knowledge of current electrical safety regulations
•
Knowledge of startup and operation of the device in each operational area
(e. g. conveyor system)
2.1.3
Startup, operation and configuration
•
Knowledge of the mechanical and electrical parameters of the conveyor system and
the characteristics of the conveyor system regarding startup and operation
•
Basic knowledge of the Windows
TM
operating system
•
Basic knowledge of data transfer
•
Basic knowledge of designing and setting up (addressing) Ethernet connections for
connecting the ICR890 System to the Ethernet
•
Basic knowledge of working with an HTML browser (e.g. Internet Explorer) for using the
online help
•
Basic knowledge of 1-D/2-D code technology
